 |
|
|
|
The Studio Solid State Relay Pack is a switching interface for controlling "ON AIR" or "RECORDING" lamps without the necessity of running high AC voltages over long distances by using low voltage DC control. It is designed to interface with the DM Engineering "SLAVE" Studio Relay Pack, but will perform with any DC control input voltage between 5 and 15 VDC. The DC input connector is a Eurostyle pluggable type and input voltage polarity need not be observed. AC input and output connections are standard Nema grounded AC plug and receptacle types. Zero-crossing technology is employed to eliminate noise and UL recognized components are used. The unit is capable of delivering up to 5A @ 125VAC, and is fused at 5A.
ONLY $96.00 + shipping
SPECIFICATIONS
OUTPUT:
- 125VAC (dependent on input line voltage)
@ .06-5A.
CONTROL
INPUTS:
-
5-15VDC @ 15 ma.
POWER: Available AC
line voltage
SIZE: 5 X 6 X 1.5 inches (including attached connectors)
SHIPPING WEIGHT: Approximately 2 lbs.
COMPANION
PRODUCTS:
+ DM
Engineering Studio SLAVE Relay Pack
+
DM Engineering "MIC PRO": A Mic ON/OFF
switch module that works in conjunction with the SLAVE, designed to give
inexpensive production mixing boards such as Mackie, Behringer and Yamaha
the Microphone Switching, Speaker Muting, and Sign Illuminating capabilities
of expensive broadcast quality consoles.
+DM
Engineering "MIC PRO 2: Expansion MIC ON/OFF Switch Module, similar
to the original MIC PRO above, but used in addition to the original MIC
PRO for individual control of additional Mic inputs.